HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 19)

Command line 19
Managed element Description
radius (on page 98 )
Manage RADIUS authentication settings
radius-group (on page 97 )
Manage RADIUS group configuration settings
role (on page 99 ) Manage user authentication order by access role (privilege)
server (on page 104 ) Manage physical HP BladeSystem server blades
serverid (on page 106 ) Manage virtual server ID configuration settings
server-port (on page 103 )
Display all physical server ports
server-port-map (on page 101 )
Manage shared server downlink port mapping configuration
server-port-map-range (on page 100 ) Manage ranges of shared server downlink port mapping
configurations
session (on page 107 ) Manage the session timeout value
sflow (on page 108 ) Manage the existing VC Ethernet network with sFlow
sflow-module (on page 108 ) Manage the network interface settings created for sFlow
sflow-ports (on page 110 )
Manage the ports to be sampled or polled for a receiver
sflow-receiver (on page 112 )
Manage the receivers
snmp (on page 117 )
Modify SNMP configurations
snmp-access (on page 114 ) Manage SNMP access configurations
snmp-trap (on page 115 ) Modify SNMP-trap configurations
snmp-user Manage SNMP user profiles
ssh (on page 118 )
Manage SSH configuration and information
ssl (on page 123 )
Manage SSL configuration and information
ssl-certificate (on page 119 ) Manage SSL certificate information
ssl-csr (on page 120 ) Manage an SSL certificate signing request
stackinglink (on page 123 ) Display stacking link information and status
statistics (on page 124 )
Display or reset statistics on a designated interconnect module
port
statistics-throughput (on page 126 ) Manage the port throughput statistics
status (on page 127 )
Display overall VC domain status information
storage-management (on page 128 ) Manage iSCSI storage management information
supportinfo (on page 129 ) Generate VC support information
systemlog (on page 130 ) Display the VCM system event log
tacacs (on page 131 )
Manage TACACS+ authentication settings
uplinkport (on page 132 )
Manage interconnect module uplink ports
uplinkset (on page 135 )
Manage shared uplink port sets
user (on page 138 ) Manage local VC user configurations
user-security (on page 137 )
Manage user security settings
vcm (on page 140 )
Manage the VC domain manager
version (on page 141 )
Display CLI version information
The following sections provide detailed information for using the subcommands with each managed element.
To display command help, enter a command followed by ? or -help. For more information on the help
subcommand, see "Help subsystem (on page 147 )."