HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 133)

Command line 133
Item Description
not allowed.
Examples
->add uplinkport enc0:1:1 Network=MyNetwork
Adds a new uplink port (Bay 1, Port 1) to a network named MyNetwork
->add uplinkport enc0:2:4 Network=MyNetwork Speed=1Gb
Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed
->add uplinkport enc0:2:3 UplinkSet=MyUplinkSet
Adds a new uplink port (Bay 2, Port 3) to a shared uplink set
->add uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Adds a new uplink port to a network with the connection mode as "Failover" and the
port role as "Primary"
->add uplinkport 1:X2 UplinkSet=MyUplinkSet
Adds a new uplink port (Bay 1, Port 2) to a shared uplink set that contains an FCoE
network
->add uplinkport enc0:1:Q1.1 Network=MyNetwork Speed=Auto
Adds a new QSFP+ uplink port (Bay 1, Port Q1.1) to a network named MyNetwork
with a port speed set to "Auto"
->add uplinkport enc0:1:Q1.1 Uplinkset=MyUplinkSet Speed=Auto
Adds a new QSFP+ uplink port (Bay 1, Port Q1.1) to a shared uplink set with a port
speed set to "Auto"
->add uplinkport enc0:1:Q1.1 Network=MyNetwork Speed=40Gb
Adds a new QSFP+ uplink port (Bay 1, Port Q1.1) to a network named MyNetwork
with a port speed set to "40Gb"
->add uplinkport enc0:1:Q1.1 Uplinkset=MyUplinkSet Speed=40Gb
Adds a new QSFP+ uplink port (Bay 1, Port Q1.1) to a shared uplink set with a port
speed set to "40Gb"
Item Description
remove uplinkport Remove an uplink port element from a network or a shared uplink port set.
Syntax
remove uplinkport [Network= |
UplinkSet=]
Parameter
PortID (required) The ID of the port to remove from a network. The specified port must already be added
to a network or uplink port set. The port name for a network or uplinkset that does not
contain an FCoE network is in the format
::X.
If the uplinkset contains an FCoE network, then the port is configured for all enclosures.
The port ID is in the format :X.
For QSFP+ ports, the format is Q..
Properties
Network
(required)
The name of the network from which the port is removed if the UplinkSet name is not
specified
UplinkSet
(required)
The name of the shared uplink set from which the port is removed if the Network name
is not specified
Examples
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network named MyNetwork
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named BlueNetwork
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1