HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem User Manual
Page 171
Configuring the Virtual Connect domain using the CLI 171
To remove all local users except for the Administrator account:
>remove user *
To display local user information:
•
Summary of all users
>show user
•
Details for all users
>show user *
•
Details for a single user
>show user steve
Up to 32 local user accounts can be created.
Each user account can be set up to have a combination of up to four access roles. For a list of commands that
each role can execute, see "User roles (on page
)."
•
Domain
o
Define local user accounts, set passwords, define roles
o
Configure role-based user authentication
o
Import enclosures
o
Name the VC domain
o
Set the domain IP address
o
Update firmware
o
Administer SSL certificates
o
Delete the VC domain
o
Save configuration to disk
o
Restore the configuration from a backup
o
Configure SNMP settings
•
Network
o
Configure network default settings
o
Select the MAC address range to be used by the VC domain
o
Create, delete, and edit networks
o
Create, delete, and edit shared uplink sets
o
Create, delete, and edit network access groups
o
Configure Ethernet SNMP settings
•
Server
o
Create, delete, and edit server Virtual Connect profiles
o
Assign and unassign profiles to device bays
o
Select and use available networks
o
Select serial numbers and UUIDs to be used by server profiles
o
Power on and off server blades within the enclosure
•
Storage
o
Select the WWNs to be used by the domain
- Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric-20.40 F8 Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem