KROHNE OPTIMASS with MFC 300 EN - Manual (Page 51)

51
Size Max Force: Flanges
Max Force: Hygienic
Connectors
06 S 19 kN 1.5 kN
10 H/S 25 kN 2 kN
15 H/S * 38 kN 5 kN
25 H/S 60 kN 9 kN
40 H/S 80 kN 12 kN
50 H/S 80 kN 12 kN
80 H/S 170 kN 18 kN
* On OPTIMASS 15H or S with ½” ASME flanges only, the max. end load is 19kN
Hastelloy and Stainless Steel
Maximum Pipework Forces
The maximum forces exerted on the meter from the pipe work, compressive or tensile has
been calculated for the 7000 Series (Straight tube meter) with Titanium, Hastelloy and SS
measuring tubes as follows:
Loads given in both tables are maximum static loads. If loads are cycling, particularly between
tension and compression then these loads should be reduced.
For information regarding Tantalum (or any material) please consult KROHNE.
Size Max Force: Flanges
Max Force: Hygienic
Connectors
06 T 19 kN 1.5 kN
10 T 25 kN 2 kN
15 T * 38 kN 5 kN
25 T 60 kN 9 kN
40 T 80 kN 12 kN
50 T 170 kN 12 kN
80 T 230 kN 30 kN
* On OPTIMASS 15T with ½” ASME flanges only, the max. end load is 19kN
Titanium