GW Instek LCR-8000G Series - Manual (Page 62)

CALIBRATION
123 123 123 123
C
ALIBRATION
Overview
Background Calibration (trimming) eliminates stray
capacitance and series impedance from the testing
fixture. It is required when using the instrument in
a new environment, or using a new set of testing
fixtures.
O/C trimming The testing fixture clips are separated by a distance
equal to the normal testing position.
S/C trimming The testing fixture clips are connected by a piece of
wire or a component lead (but no direct connection
between the clips).
LCR-8000G Series User Manual
124 124 124 124
Alternative S/C
trimming An alternative method of S/C trimming.