GW Instek LCR-8000G Series - Manual (Page 35)

PASS-FAIL MODE
69 69 69 69
Backspace All clear
Clear
Hi and Lo values are automatically swapped if
necessary
Hi and Lo Swapped
4. The display updates the Hi/Lo result
immediately. The result is pass if the bar stays
in the central area. The buzzer sounds
accordingly.
Result > Hi HI
Result < Lo LO
Lo < Result < Hi
(Pass) PASS
Use display value as nominal
Panel operation (For Percentage and Delta only) The
displayed value can be used as the
nominal value. Press F6 (Save Nom) to
copy the display value to the nominal
value.
F 6
1.2345
0.2179 mF
D
LO
–
Hi
Lo
+1.00%
–1.00%
100.00mF
1.2345
0.2179 mF
D
PASS
–
Hi
Lo
+1.00%
–1.00%
1.2345mF
LCR-8000G Series User Manual
70 70 70 70
Multi-Step Test Configuration
Overview
Background The multi-step function can configure and run
multiple measurement steps. Maximum 64
programs, 30 steps each, can be programmed and
stored in the instrument.
Limit type Only the absolute limit
testing is available. For
percentage limit test, use
the single mode (page60).
C S Series capacitance B Susceptance Test item
C P Parallel
capacitance
G Conductance
L S Series inductance Z Impedance
L P Parallel inductance Y Admittance
R S Series resistance R DC DC Resistance
R P Parallel resistance θ Angle
X Reactance
For detailed description of each item, see page37.