GW Instek LCR-8000G Series - Manual (Page 45)

GRAPH MODE
89 89 89 89
Select measurement item
Range Ls Series inductance θ Angle
Lp Parallel inductance Rs Series resistance
Q Quality factor Rp Parallel resistance
Cs Series capacitance X Reactance
Cp Parallel capacitance G Conductance
D Dissipation factor B Susceptance
Z Impedance Y Admittance
For detailed description of each item, see page37.
Panel operation Press F5 repeatedly to select the graph
measurement item. F 5
LCR-8000G Series User Manual
90 90 90 90
Horizontal Scale Setting
Set horizontal axis (Voltage)
Background The X (horizontal) axis is selectable from Voltage
and Frequency sweep.
• When Voltage sweep is selected: measurement
Frequency is fixed
• When Frequency sweep is selected:
measurement Voltage is fixed
Select Drive level
(Voltage) 1. Press the Up/Down key and move
the cursor to Sweep.
Sweep: Frequency
2. If necessary, press the Left/Right
key to change the sweep setting to
Voltage (Drive Level).
Frequency Drive Level
Set start Voltage 3. Press the Up/Down key and move
the cursor to Start.
Start: : 50mV
Use the numerical keys to enter the
starting Voltage.
Range 10mV ~ 2V (AC≤3 MHz)
10mV ~ 1V (AC>3 MHz) *1mV step
100mV
m V/A Enter
1V
V/A Enter
Backspace All clear
Clear
If a wrong unit is entered, the value is cancelled.