GW Instek LCR-8000G Series - Manual (Page 42)

PASS-FAIL MODE
83 83 83 83
Multi-Step Program File Operation
Save program
Save (overwrite) Press F4 (Save) to save the program
being edited. A confirmation message
appears on the display.
Program saved
F 4
Save as (new
program) 1. Press F5 (File), then F3 (Save As).
The new program name dialogue
appears.
F 5
F 3
2. Enter the new program name using the arrow
keys.
Move cursor
(Left/Right keys)
JKLM N OPQRS
Enter the letter
(Down key) program name: N_
Delete one letter
(Up key) program name: _
LCR-8000G Series User Manual
84 84 84 84
3. Press the Enter key to confirm the
file name. To quit the Save as mode,
press the Clear key.
Enter
Clear
4. The display goes back to the previous mode,
with the program changed to the new name.