GW Instek LCR-8000G Series User Manual

Page 38

PASS-FAIL MODE

Move cursor
(Left/Right keys)

JKLM

OPQRS

Enter the letter
(Down key)

program name: N_

Delete one letter
(Up key)

program name: _

3. Press the Enter key to confirm the

file name. To quit the new program
mode, press the Clear key.

Enter

Clear

4. A blank program with the entered name

appears.

5. Press F1 (Prog). Step 01 becomes

active and changes to Ls
measurement mode. For further
editing details, see the next page.

F 1

Step
Func

OFF

Step
Func

LCR-8000G Series User Manual

Edit program step

How to edit
parameter

•

For selecting parameters, press F1
(Prog) repeatedly.

F 1

•

For entering values, use the numerical and unit
keys.

Example:

0.5kHz

Enter

Backspace

All clear

Clear

Increase

Decrease

How to move
cursor

To move the cursor to the editing point,
use the arrow keys: up, down, left, and
right.

Note: The cursor cannot move into
blank columns or steps.

Panel operation

1. Create new
step

To create a new step in a program,
press F1 (Prog) at Func column “OFF”.
The step becomes active and the
function changes to Ls. Up to 30 steps
are available in a program.

F 1

Step
Func

OFF

Step
Func

2. Select item
(function)

Move the cursor to Func column, press
F1 (Prog) repeatedly. The measurement
item (function) changes in the following
order.

F 1

Ls → Lp → Q → Cs → Cp → D → Z → θ → Rs → Rp
→

X → G → B → Y → Rdc → Ls