GW Instek LCR-8000G Series - Manual (Page 43)

PASS-FAIL MODE
85 85 85 85
Recall (load) existing program
Panel operation 1. Press F5 (File). The file menu
appears.
F 5
2. Press F1 (Load). The existing
programs appear, listed in
alphabetical order.
F 1
3. Use the arrow key to move the
cursor to the program to be recalled
(loaded).
4. Press F1 (Load) to recall the selected
program on the display.
F 1
5. To cancel loading and go back to the
previous menu, press F6 (Quit).
F 6
LCR-8000G Series User Manual
86 86 86 86
Delete existing program
Recall program 1. Press F5 (File), then F2 (Delete). The
existing programs appear, listed in
alphabetical order.
F 5
2. Use the arrow key to move the
cursor to the program to be deleted.
3. Press F5 (Del). The buzzer beeps and
a warning sign appear. Press the
Enter key (confirm) or the Clear key
(cancel).
F 5
Enter
Clear
DELETE FILE
Delete New ?
Enter-Yes Clear-Quit
Note: the currently active program cannot be
deleted. An error message appears.
program being used!
4. To go back to the previous menu
without deleting any program, press
F6 (Quit).
F 6