1 introduction – LumaSense Technologies LumaSoft Gas Multi Point 7860 User Manual
Page 8
Chapter 1
_________________________________________________________________________
________________________________________________________________________
BE6027-12
LumaSoft Gas Software
LumaSense Technologies A/S
7810 and 7860
Page 8 of 194
1.1 Introduction
This manual can be used in several ways. The first time users can work
their way through the examples in order to get to know the monitoring
system. The more experienced users can jump directly to the relevant
chapters in order to gain assistance, and experts can use this manual as
a reference book by using the index.
The LumaSoft Gas Single Point 7810 Software is used as a single
channel monitoring software for Photoacoustic Gas Monitor – INNOVA
1412i, Photoacoustic Gas Monitor – INNOVA 1314i and LumaSense SF6
Leak Detector - 3434i.
The LumaSoft Gas Multi Point 7860 Software is used as a multi channel
monitoring Software for Photoacoustic Gas Monitor – INNOVA 1412i in
system, Photoacoustic Gas Monitor – INNOVA 1314i and LumaSense SF6
Leak Detector - 3434i with up to two Multipoint Samplers – INNOVA
1309 or four Multipoint Sampler and Doser - INNOVA 1303.
NOTE: The LumaSoft Gas Multi Point 7860 Software requires a license
dongle connected to the USB port in order to run.