LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 35)

Chapter 3
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 35 of 194
3.1.3 Configuration of the RS-232 interface
The System Configuration Setup window appears. Now you select the
COM Port: radio button as shown in figure 3.11 in case it is not
selected. Press the OK soft-key.
Figure 3.11 Select the RS-232 communication interface.
Select the Scan Network pull-down menu (Figure 3.12).
Figure 3.12 File pull-down: Scan Network