LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 5)

Safety Considerations
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 5 of 194
Safety Considerations.
Throughout this manual Monitor is used for:
Photoacoustic Gas Monitor – INNOVA 1412i
Photoacoustic Gas Monitor – INNOVA 1314i
LumaSense SF6 Leak Detector - 3434i
The Monitor complies with:
• EN/IEC 61010-1, 2 nd Edition: Safety requirements for electrical
equipment for measurement, control and laboratory use.
• Can/CSA-C22.2 No. 61010-1-04 - Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use
• UL Std. No. 61010A-1 (2 nd Edition) - Safety Requirements for
Electrical Equipment for Measurement, Control, and Laboratory Use.
To ensure safe operation and retain the Monitor in safe condition, note
the following:
EXPLOSION HAZARD!
TO AVOID THE POSSIBILITY OF AN EXPLOSION; MONITORING
OF FLAMMABLE GASES IN EXPLOSIVE CONCENTRATIONS MUST
NEVER BE ATTEMPTED.
Never operate the Monitor in potentially explosive environments.
When monitoring potentially flammable or toxic gases it is essential
that:
• The instrument itself is placed in a well-ventilated area outside the
potentially hazardous zone.