LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 17)

Chapter 2
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 17 of 194
3. Here you can select whether the IP address of the 1412i/1314i/3434i
gas monitor is to be assigned by a DHCP server in the local network.
If you want the 1412i's, 1314i's or 3434i's IP address to be assigned
by the DHCP server press the Yes key, where after you will proceed
to the below step 6, as the IP address is set by the DHCP server. If
you want yourself to set the IP address of the 1412i/1314i/3434i
press the No key. The screen display now shows the following text.
4. Here you can change the IP address of the 1412i/1314i/3434i gas
monitor in case the IP address is not set by a DHCP server in the
local network. If you want to change the IP address, press the
↵
key. If the IP address does not need to be changed, press the ▼ key
and you will proceed to the below step 6.
If you selected to change the IP address, the screen display now
shows the following text.
5. Here you can change the 4 individual numbers in the IP address by
using the ▲ and ▼ keys. Each of the 4 individual numbers can be set
in the range from 000 to 255.
You can step between the 4 individual numbers in the IP address by
using the ◄ and ► keys.
In case you want to return to the start value of the IP address press
the CANCEL key. In case you want to return to the default stored
value of the IP address press the DEFAULT key.
When you have set the IP address, press the
↵ key. The screen
display now shows the following text.
6. Here you can set the IP port number for the TCP/IP communication.
This normally does not need to be changed. If you want to change
the IP port number press the
↵ key. If the IP port numbers does not
need to be changed, press the ▼ key and you will proceed to the
below step 8. If you selected to change the IP port number the
screen display now shows the following text.
1412i'S IP ADDRESS 192.168.000.200
PRESS ENTER TO CHANGE VALUE
1412i'S IP ADDRESS 192.168.000.200
CANCEL DEFAULT
1412i'S IP PORT NUMBER: 23
PRESS ENTER TO CHANGE VALUE