LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 108)

Chapter 4
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 108 of 194
Figure 4.82 View pull-down: Alarms Window
The Measurement Alarms view shows the latest occurred software
alarms, see Figure 4.83.
Figure 4.83 The Measurement Alarms view
Each alarm is date and time stamped, with channel number, Gas and
filter name, measured value and Alarm type.
The Sr No. check box gives the user the opportunity to acknowledge an
alarm.
4.5 Export Task
During or after measurement all the current measurements can be
exported to Microsoft Excel file format. This gives the opportunity to do
custom data processing on the measurement data, like calculation,
presentation in table or graph format.
Two types exports are available, either channel-wise (see Section 4.5.1)
or gas-wise (see Section 4.5.2 ).
Please note that Microsoft Office must be installed for the export
task functionality to work.
4.5.1 Export Task (Channel view)
The measurement data export can be initiated by using the File menu
pull-down Export Task>Select Gases/Channel Excel sheet, see
Figure 4.84 .