LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 48)

Chapter 3
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 48 of 194
When the alarms have been configured choose whether there should be
a PC beep when the alarm level is reached. Press Add soft-key to add
the configured alarms and then OK to proceed. (See Figure 3.30)
Figure 3.30 Press Add soft-key to add the configured alarms
To remove a gas from the alarm list highlight the gas using a mouse
click and press the Remove soft-key. (See Figure 3.30)