2 configuration of the ethernet (tcp/ip) interface, Section 3.1.2 – LumaSense Technologies LumaSoft Gas Multi Point 7860 User Manual
Page 32

Chapter 3
_________________________________________________________________________
________________________________________________________________________
BE6027-12
LumaSoft Gas Software
LumaSense Technologies A/S
7810 and 7860
Page 32 of 194
Figure 3.6 The 1412i USB driver.
3.1.2 Configuration of the Ethernet (TCP/IP) interface
The System Configuration Setup window appears. Now you select the
TCP/IP: radio button as shown in figure 3.7 in case it is not selected.
Figure 3.7 Select the TCP/IP communication interface.
This manual is related to the following products: