LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 6)

Safety Considerations
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 6 of 194
• A sufficiently long tube is connected to the air-outlet on the back
panel so that the sampled gas is carried away to the open air or to an
extraction and/or filtration unit.
Warnings!
• Avoid water condensation in the Monitor.
• Switch off all equipment before connecting or disconnecting their
digital interface. Failure to do so could damage the equipment.
• Whenever it is likely that correct function or operating safety of the
apparatus has been impaired, the apparatus must be made in-
operative and secured against unintended operation.
• Any adjustment, maintenance and repair of the open apparatus
under voltage must be avoided as far as possible and, if unavoidable,
must be carried out only by trained personnel.
• If a fault is reported by the Monitor that indicates correct function of
the instrument may be impaired, consult your local LumaSense
Technologies representative. Under no circumstances should repair
be attempted by persons not qualified in service of electronic
instrumentation.