Yokogawa PC-Based MX100 - Manual (Page 99)

3-18 IM MX180-01E
3.3 Readng Values Usng Cursors
Procedure
1. On the waveform display window, click the tag of the group from which you wish
to read the value using cursors.
2. Click the position of the desired data in the waveform display area of the
waveform display window.
If you wish to read another point simultaneously, drag the cursor. Cursor A appears at the
position where you first clicked; Cursor B appears at the position where you released the
mouse button. A yellow circle is displayed where the waveform and the cursor cross.
You can move the waveform that is displayed in the waveform display area using the scroll
buttons or scroll bar.
Cursor A
Cursor B Measurement point
Group selection tab
3. From the Window menu, choose Control.
The Cursor Value window opens.
Channel number and
measurement unit
Channel display color
Time between Cursors A and B
Time at Cursor B
Time at Cursor A
Readout value of Cursor B – Readout value of Cursor A
Readout value of Cursor B
Readout value of Cursor A
Alarm
indication
Data number at Cursor A
Move
Cursor A
Data number at Cursor B
Move
Cursor B
Difference in the data number
between Cursors A and B