Yokogawa PC-Based MX100 - Manual (Page 26)

2-12 IM MX180-01E
While the CF card is being formatted, the 7-segment LED of the main module
displays the following.
Explanaton
Items That Can Be Confrmed on the System Screen
• Unt Setup
You can check the model, version, serial ID, option, temperature unit, and the A/D
integration time.
• Module Arrangement
If you click the Current Configuration tab, the attachment conditions (attachment
positions and types) of the input/modules identified by the software are displayed.
If you click the Actual Configuration tab, the attachment conditions of the actual input/
output modules are displayed.
• Network Informaton
You can check the machine name, IP address, subnet mask, default gateway, port
number, and MAC address.
• Compact Flash Informaton
You can check the status, maximum size, and free area of the CF card inserted in the
card slot.
The CF card status indicates the following:
None : The CF card is not inserted in the slot.
Exists (Usable) : The CF card is inserted in the slot and usable.
Exists (Unusable): The card is inserted in the slot but unusable due to reasons such
as an unformatted card, unsupported file system, or broken card.
Check the unit setup
Check the network information Check the CF card information
Check the module information
(system reconfiguration is possible)
2.2 Confgurng the System, Settng the Wrte Mode of the CF Card, and Formattng the CF Card