Yokogawa PC-Based MX100 - Manual (Page 64)

2-50 IM MX180-01E
2.7 Startng and Stoppng the Recordng of
Measured/Computed Data
Procedure
Record Start Operaton
Click the Record button on the Monitor screen, or choose Record from the Acquisition
menu.
Click
or
Choose
When recording starts, the display changes as shown in the figure below. To divide the
file during recording, click the Manual Save button or choose Manual Save from the
Acquisition menu.
When dividing files
Changes to red when recording starts
Changes to red when recording starts
Elapsed time of recording
or
Choose
While the Start Condition specified on the Acquisition setup screen is not met, the word
“Waiting”appears under the Record button (see figure below).
Note
Clicking the Record or Stop buttons repetitively at short intervals or clicking the Manual Save
button many times may hinder the measurement operation and file division process.
Record Stop Operaton
To stop recording when Stop Condition specified on the Acquisition screen is set to
Manual or before the stop condition is met, click the Stop button on the Monitor screen or
choose Stop from the Acquisition menu.
Click
or
Choose