Yokogawa PC-Based MX100 - Manual (Page 117)

4-6 IM MX180-01E
The figure below is an example of the 6-CH, Medium-Speed, Four-Wire RTD
Resistance Input Module. Channels are not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement
range to be calibrated
from the list
The figure below is an example of the 4-CH, Medium-Speed Strain Input Module.
Channels are not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement
range to be calibrated
from the list
The figure below is an example of the 8-CH, Medium-Speed Analog Output
Module. A range is not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement
range to be calibrated
from the list
4.2 Calbraton Procedure