Integraton montor – Yokogawa PC-Based MX100 User Manual
Page 8
1-2
IM MX180-01E
• Vewer
Enables you to display measured and computed data that has been saved, read
values and perform statistical computation over an area using cursors, and convert
the measured and computed data into various file formats such as Excel.
• Calbrator
Enables you to calibrate the MX100 input/output modules.
Integraton Montor
The main operations are carried out using the six windows shown below. If the MX100 is
not connected, the windows other than the Connection window cannot be displayed.
• Connecton screen
You can search for MX100s in the same segment, and connect to the target MX100.
You can also assign a machine name, IP address, subnet mask, and default gateway
to the detected MX100. Once a connection is established, the connection is made
automatically to the same MX100 the next time the Integration Monitor is started.
• System setup screen
You can change the A/D integration time and check the main module information.
When the attached input/output module is changed, you can update the module
configuration information.
You can check the network setup information of the connected MX100.
You can format the CF card or check the free space on the CF card of the connected
MX100.
• Acquston setup screen
You can set the monitor interval of the measured data and the record start/stop
conditions. You can also set the save destination, file name, file division, and comment
of the recorded data.
1.1 Functonal Explanaton of the MX100 Standard Software