Yokogawa PC-Based MX100 - Manual (Page 97)

3-16 IM MX180-01E
Numerc Dsplay
Numeric display can be shown along with the waveform display window. When a group
contain channels with different measurement intervals, the screen is divided accordingly.
The display group, active channel, and mark display are synchronized to the waveform
display.
If cursors are displayed on the waveform display window, the data values between the
cursors are displayed in red. Also, the data column corresponding to the cursor position
is displayed in gray.
Date/Time
Switch the display
group
Alarm
Channel display color
Value Data number
Active channel (Y-axis displayed
on the waveform display)
Mark
indication
Horizontal scroll
Display per record interval
Note
• If you open the numeric display window when two cursors are shown on the waveform
display window, the data in the interval between the cursors is displayed in red. If you
choose Copy from the Edit menu (press the Ctrl + C key) in this condition, the data in the
interval is copied to the clipboard as text data.
• Up to 1000 lines can be copied. (Copy on the Edit menu is not available if the number of
lines specified by the cursors is above 1000.)
• If data of multiple measurement intervals is displayed, the data in the interval between the
cursors on the data sheet with the active measurement interval is copied. (The newest line
is displayed in light blue on the data sheet with the active measurement interval. The newest
line and the newest column are displayed using the same color on non-active sheets. You
can activate a sheet by clicking the sheet.)
3.2 Dsplay Settngs