Yokogawa PC-Based MX100 - Manual (Page 66)

2-52 IM MX180-01E
2.8 Pausng the Updatng of the Montor Dsplay
and Readng Measured/Computed Values
Usng Cursors
Procedure
Pausng and Resumng the Updatng of the Montor Dsplay
To pause the monitor display, click the Pause button on the Monitor screen or choose
Pause from the Acquisition menu. When paused, the word “Pause”under the button
toggles between red and black.
To resume the monitor display, click the Pause button on the Monitor screen or choose
Pause release from the Acquisition menu.
Click
or
Choose
Note
Recording continues even when the updating of the monitor display is stopped.
Readng Measured/Computed Values Usng Cursors
When updating of the monitor display is paused, you can read measured (computed)
values with the cursor. Click the position in the waveform display area where you wish to
read the value. If you wish to read another point simultaneously, drag the mouse. Cursor
A appears at the position where you first clicked; cursor B appears at the position where
you released the mouse button. The measured point is the yellow circle displayed where
the waveform and the cursor cross.
Change the display area
Time at Cursor B
Time at Cursor A
Scroll bar
Scroll button
Measurement point
Cursor B
Cursor A
Cursor movement button
Time between Cursors A and B
(value B) − (value A)
Readout value of Cursor B
Readout value of Cursor A
Channel number
Waveform display color