Yokogawa PC-Based MX100 User Manual
Page 128
5-6
IM MX180-01E
Error Messages on the Vewer
Error Code
Message
Correctve Acton/Descrpton
Reference
Page
E0004
File write error.
The file cannot be created for some reason.
-
E0212
Can’t read file.
Target files cannot be loaded, or are deleted.
3-2
E3111
Channels of the specified
recording interval do not exist.
Channels with the specified measurement interval do not exist
in the conversion of the data format.
Change to the correct setting.
3-24
E3114
Sampling data number is over
the Viewer display limit of 5 M.
Attempting to load a file containing 5 million or more data
points.
3-2
E3120
Not a data file.
Target files cannot be loaded, or are damaged.
3-2
E3153
File open error.
File not created because allowable number of files in the CF
card will be exceeded. Delete files to reduce the total number.
3-5
W3115
Exceeded the range of the Excel
sheet. Convert to Excel?
Change the range to be converted so that it is within the
allowed range of Excel.
3-25
W3116
Exceeded the range of the
Lotus 1-2-3 sheet. Convert to
Lotus?
Change the range to be converted so that it is within the
allowed range of Lotus 1-2-3
3-25
Error Messages on the Calbrator
Error Code
Message
Correctve Acton/Descrpton
Reference
Page
W4700
Connection failure. Check
the IP Address/Host Name or
Calibration mode.
To change the network settings such as the IP address, start
the Integration Monitor.
The MX100 has no Calibration mode.
2-5
W4701
Failed to write the calibrated
value.
Recalibrate. If the message is still displayed, service required.
4-4 to 4-9
W4702
Failed to calibrate.
Recalibrate. If the message is still displayed, service required.
4-4 to 4-9
5.2 Error Messages and Ther Correctve Actons