Yokogawa PC-Based MX100 - Manual (Page 29)

2-15
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
Settng the Record Interval of Computed Data
1. Click Acquisition to show the Acquisition setup screen.
2. Enter the record interval (integer multiplication factor) in the Rec. Interval text box.
Automatically set to the minimum monitor interval of
the interval group with modules assigned or 100 ms,
whichever is less (cannot be changed).
Set using an integer multiple of the monitor interval
for each computation group (up to 128)
The recording to the data file is carried out at
(monitor interval × multiplication factor).
Settng the Record Start and Stop Condtons and Resettng Computaton
1. Click Acquisition to show the Acquisition setup screen.
2. Select On Record, Fixed Time, or Math under Start Condition.
If you select Fixed time, enter the start date/time.
3. Select Manual, Fixed Time, Fixed Period or Math under Stop Condition.
If you select Fixed time, enter the stop date/time.
If you select Fixed period, enter the record time.
Start recording immediately
Select the record start condition
Start recording when the specified time is reached
Start recording when the specified condition (see the
explanation in this section) is met in the equation
Record continuously (stop by pressing the Stop
button on the Monitor screen)
Stop recording when the specified time is reached
Stop after recording the time interval specified here
Stop recording when the specified condition (see the
explanation in this section) is met in the equation
Select the record stop condition
4. To reset the computed results at the same time recording is started, select the
Math Clear on Start check box.
2.3 Settng the Acquston Condtons of the Measured/Computed Data