Yokogawa PC-Based MX100 - Manual (Page 59)

2-45
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
Explanaton
Dsplay Groups and Group Names
On the Monitor screen, the channels are divided into groups and displayed using
waveforms or numerical values. The measured/computed values can be divided into
up to ten groups. Up to thirty-two channels can be registered to a single group. The
channels that can be registered are those where the Monitor check boxes are selected
in the Channel setup screen. When you click a channel selection button on the Display
setup screen, the channel numbers of the channels that can be registered are displayed
(see the figure below).
To turn ON/OFF the waveform display on the Monitor screen, click the light-blue button
below the scale bar as shown in the figure below.
Hide the waveform
You can enter a group name using up to thirty characters. By default, group names
Group 01 to Group 10 are assigned. The names of the display groups that have channels
registered are displayed on the Monitor screen.
Y-Axs Type
You can select linear or logarithmic scale for the Y-axis when displaying the waveforms.
Linear scale Logarithmic scale
2.6 Dsplayng the Montor and Settng the Dsplay Procedure