Yokogawa PC-Based MX100 - Manual (Page 61)

2-47
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
• Slde zone
Displays the waveforms by slightly offsetting the display position of each waveform
vertically regardless of the Zone settings on the Display setup screen. A single Y-axis
scale of the active waveform can be displayed.
Select slide zone
Slide in this manner
• Auto zone
Displays the waveforms by dividing the waveform display area evenly according to the
number of displayed waveforms regardless of the Zone settings on the Display setup
screen.
Select auto zone
Divide evenly automatically
• Mult-axs zone
All the Y-axes of the displayed waveforms are aligned horizontally. To hide a Y-axis
scale, clear the Y-Axis check box on the Display setup screen. The display zone is set
to the position specified by Zone on the Display setup screen.
Turn OFF the
Y-axis of
Ch00002
The scale of Ch00002
is not displayed
Select multi-axes zone
Click the bar to move the active
Y-axis to the left end
Indicates the active Y-axis
2.6 Dsplayng the Montor and Settng the Dsplay Procedure