Yokogawa PC-Based MX100 - Manual (Page 63)

2-49
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
Addng Marks
You can display marks in the waveform display area (see the figure below). You can
enter a text to be attached to the mark (“Mark” by default) using up to fifteen characters.
Click the Mark button or choose Mark Configuration from the Action menu. You can enter
the text in the dialog box that opens.
Up to 200 marks can be displayed. When 200 is exceeded, the marks are erased from
the oldest ones. However, if the data is being recorded, the marks are saved to the
record file.
Mark Mark setup dialog box Text of the specified mark
Enter the text to be
displayed as a mark
If this check box is selected, the mark is placed without
displaying the dialog box when you choose Put a Mark
from the Action menu.
Note
Marks cannot be placed when the monitor update is paused.
Numerc Dsplay
You can switch from the waveform display to numeric display as shown below.
Switch the display group
Switch to waveform, numeric, or
waveform and numeric display
Channel display color
Channel number
Level indication with respect to
the scale width
Numeric display
Unit
Waveform and Numerc Dsplay
Switch the display group
Numeric display screen Waveform display screen
Change the display area
When paused, you can drag to change the
display area of the digital and waveform
displays.
Switch to waveform, numeric, or
waveform and numeric display
2.6 Dsplayng the Montor and Settng the Dsplay Procedure