Yokogawa PC-Based MX100 - Manual (Page 47)

2-33
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
Settng Tmers (Only When Usng Tmers n the Computatons)
11. Click Action for a timer and select Edge or Level.
When not using the timer, select Off (default).
12. Click the Interval box, and enter the interval.
13. If Action was set to Edge, click the On-period box and enter the time interval over
which the timer is to be turned ON. If Action was set to Level, click the On-period
or Off-period box and enter the time over which the timer is turned ON or OFF.
If Action is set to Level, enter the time interval over which
the timer is OFF.
If Action is set to Edge or Level, enter the time interval over which
the timer is ON.
Set the timer interval
Minimize
button
To use a timer in the computation, select Edge or Level
When not using the timer, select Off (default).
When Calculatng ±Overrange Values of Measurement Channels as the Maxmum
and Mnmum Values of the Measurement Range
14. Select the Calculate +Over/–Over as the MAX/MIN value of the measurement
range check box.
Check here to calculate +Over and –Over as maximum and minimum values of the measurement range
Resettng the Computatons
From the Action menu, choose Math Clear.
2.5 Settng Computatons (Settng the Computaton Channels)