Yokogawa PC-Based MX100 - Manual (Page 94)

3-13
IM MX180-01E
Vewer
3
2
1
4
5
App
Index
Addng Marks
In addition to the marks placed using other programs such as the Integration Monitor,
you can add marks at the positions where you click (displays a cursor) on the waveform
display area. You can enter a text to be attached to the mark (“Mark”by default) using up
to fifteen characters. You can also select Left, Center (default), Right, or Flag (small mark
without text) for the Type. For types other than Flag, the specified string and the relative
or absolute time at the mark position are displayed.
You can set the string and type in the Mark dialog box that opens when you click the
Append Mark icon (or choose Append Mark from the Edit menu). In the Mark dialog box,
you can select whether to add the mark to the waveforms of all groups (default) or only
the waveforms of the displayed group.
To delete specific displayed marks, select the range using cursors, and then choose
Delete Mark from the Edit menu. To delete all the marks added using the Viewer, choose
Reset Mark from the Edit menu.
Left end Add mark icon Center Flag Display the cursor
or
Marks added on the Viewer are green,
and marks added on other programs
are orange.
Double-click the mark to change the settings
Swtchng between Absolute and Relatve Tme
By default, the time axis is displayed using absolute time. The time axis can also be
displayed using time relative to the first data position.
Switch absolute/relative time
Absolute Time Relative time
On the numeric display, you can select the display format of the absolute or relative time
and turn ON/OFF the data numbers using Format on the View menu.
In the alarm/mark list, the time is always displayed using absolute time.
3.2 Dsplay Settngs