Yokogawa PC-Based MX100 - Manual (Page 57)

2-43
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
2.6 Dsplayng the Montor and Settng the Dsplay
Procedure
Procedure
Changng the Dsplay Settngs on the Dsplay Setup Screen
Channel display color
Trip point
Display zone position
Maximum/Minimum value of the scale
Select the display format of the Y-axis
(normal/exponent)
Select the Y-axis type (linear/logarithmic)
Turn scale ON/OFF when displaying
multi-axes zone
Channel select button
Display ON/OFF
Switch the display group
Group name
Execute automatic channel assignment
Number of channels assigned automatically
Restore the default maximum and minimum
values of the entire scale
Turn ON/OFF the trip point display
Click here
1. Click Display to show the Display setup screen.
2. Change the display settings according to the explanation is the figure below.
Set the display for each display group. You can set up to ten display groups.
Intalzng, Copyng, and Pastng of Settngs on the Dsplay Setup Screen
On the Display Setup Screen, you can reset the settings to default or copy and pate the
settings of one or multiple waveforms to the settings of other waveforms. You can copy
and paste according to the procedure below.
Click the copy source waveform number (No. column), choose Copy from the Edit menu,
click the copy destination waveform number, and choose Paste from the Edit menu.
All ON or OFF
Select to copy
Do not copy Restore the default setting
Assign channels automatically
Copy first item to rest of selection
Select all channels
Drag to select the range