Yokogawa PC-Based MX100 - Manual (Page 19)

2-5
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
Changng the Network Confguraton
1. With the MX100 icon and network information displayed in the box containing the
Edit Network setup button on the Connection screen, click the Edit Network setup
button.
The Machine Name, IP address, Subnet Mask, and Default Gateway items turn into text
boxes.
2. Refer to the explanations in this section and enter the required information in the
boxes.
The Apply and Cancel buttons appear.
3. Click Apply.
Click Cancel to return to the original settings.
Network setup cannot be changed
when there is another connected
software program
A yellow mark is displayed if there is
a connected user/software. Click here
• Invalid IP address setting • Invalid Subnet mask setting • Invalid default gateway setting
• When the MX100 you wish to
configure is connected by
another software program
• When you attempt to change
the IP address while the
connection is established
When network setup does not work,
the following screen appears.
Check whether the IP address
setting is appropriate and whether
the combination of the IP address
and subnet mask is appropriate.
Check whether the subnet mask
setting is appropriate.
Check whether the default gateway
setting is appropriate.
• When the message “Search
MX100s nearby again” appears.
Note
Enter network settings to avoid conflicts with other PCs. If network settings or searches are
performed on multiple PCs simultaneously, the operation may fail.
2.1 Connectng and Dsconnectng the MX100