Yokogawa PC-Based MX100 - Manual (Page 15)

2-1
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
2.1 Connectng and Dsconnectng the MX100
Procedure
Before carrying out the procedure below, turn ON the power to the relevant MX100 and
connect the MX100. When connecting the MX100 for the first time, the MX100 and the
PC must be connected locally in a one-to-one configuration.
Note
Connecting the MX100 and the PC to a mission-critical network before an appropriate IP address
is assigned to the MX100 may adversely affect other connected devices on the network.
Connectng to an MX100 That Has Not Been Confgured for the Network
1. Start the Integration Monitor according to the procedure given in section 1.4.
The Connection screen opens.
2. Click the Search button.
If an MX100 is found, icons appear in the frame containing the Search button for MX100s in
the same network segment.
Instrument number (NO.) written on the
name plate of the main module
Displays the icon of the MX100 in the same network segment
MX100 machine name
Name of PC connected to the MX100
Icon indicating connection by other software
Note
• If multiple MX100s are connected in the same network segment, multiple icons appear
together with the corresponding instrument numbers (NO.).
• When using Windows XP, Windows Vista, or Windows 7 with the firewall enabled,
recognition is sometimes not successful even when clicking the Search button. To solve the
problem, see appendix 1. (The same problem may also occur if your anti-virus software is
using a firewall.)
Chapter 2 Integraton Montor