Yokogawa PC-Based MX100 - Manual (Page 46)

2-32 IM MX180-01E
Importng Tag Numbers and Tag Comments
You can import just the tag numbers and tag comments from the saved setup data and
replace the current tag numbers and tag comments with the imported information. From
the File menu, choose Import Tag. Then, select an MX100 project file (a file with the .mxp
extension) in the Open dialog box to import the tag numbers and tag comments.
Select the MX100 project file (file with .mxp extension)
you wish to import
Note
When you carry out the procedure above, the tag numbers and tag comments of measurement
channels are also imported.
Importng User-Defned Constants
On the File menu click Import Tag, then select an MX100 project file (a file with an
.mxp extension) in the Open dialog box to import just the saved tag numbers and tag
comments.
Select the MX100 project file (file with .mxp extension)
you wish to import
2.5 Settng Computatons (Settng the Computaton Channels)