Yokogawa PC-Based MX100 User Manual
Page 88
3-16
IM MX100-01E
Description Outputs settings and statistical information specific to the MX100 in a form
enclosed by EA and EN.
APP: applalive:
APP keepalive check cycle.
TCP: keepalive:
TCP keepalive check cycle.
TCP: connects:
Total number of connections established.
TCP: closed:
Total number of dropped connections.
TCP: timeoutdrop:
Total number of dropped connections due to TCP
retransmission timeout (if the transmitted packet (the
unit of transmitted data) is not received, the packet
is automatically retransmitted at a predetermined
time interval. If the packet is not received after 14
retransmissions, timeout occurs and the connection
is dropped.)
TCP: keepdrops:
Total number of dropped connections due to TCP
keepalive timeout.
TCP: sndtotal:
Total number of transmitted packets.
TCP: sndbyte:
Total number of transmitted bytes.
TCP: sndrexmitpack: Total number of retransmitted packets.
TCP: sndrexmitbyte: Total number of retransmitted bytes.
TCP: rcvtotal:
Total number of received packets.
TCP: rcvbyte:
Total number of received bytes.
DLC: 16 collisions:
Number of collisions that occurred (A collision
occurs when two or more devices on the network
attempt to transmit simultaneously. The tendency
for collisions to occur increases when the network
is congested. 16 collisions refers to 16 consecutive
collision incidents.)
DLC: speed:
Link speed
quit Quit maintenance/test (drop the connection of the device in operation)
Function
Drops the connection between the PC and the MX100.
Setting
quit
Example
quit
E0
Description After “E0“ is returned, a disconnect request (FIN) is issued from the
MX100.
3.5 MX100 Maintenance and Test Using Communication Commands