Yokogawa PC-Based MX100 - Manual (Page 101)

4-13
IM MX100-01E
Specification
3
2
1
4
5
Index
The inputs indicated below can be used on MXLOGGER or the MX100/DARWIN API
(software sold separately).
Input
Measurement
Range Type
Rated Measurement
Range
Measurement Accuracy Highest
Resolution
(1 Digit)
Integration Time: 16.67 ms
or More
Integration Time: 1.67 ms
DC voltage
60 mV (high res.) 0.000 to 60.000 mV ±(0.05% of rdg + 20 digits) ±(0.1% of rdg + 100 digits) 1 µV
1 V –1.0000 to 1.0000 V ±(0.05% of rdg + 2 digits) ±(0.1% of rdg + 10 digits) 100 µV
6 V (high res.) 0.0000 to 6.0000 V ±(0.05% of rdg + 20 digits) ±(0.1% of rdg + 100 digits) 100 µV
Thermocouple (excludes RJC accuracy
, when
burnout is OFF)
PLATINEL 0.0 to 1400.0°C ±(0.05% of rdg + 1°C) ±(0.1% of rdg + 4°C)
0.1°C
PR40-20 0.0 to 1900.0°C
±(0.05% of rdg + 2.5°C)
Except 300 to 700°C: ±6°C
less than 300°C: not guaranteed
±(0.1% of rdg + 12°C)
Except 300 to 700°C: ±25°C
less than 300°C: not guaranteed
NiNiMo 0.0 to 1310.0°C ±(0.05% of rdg + 0.7°C) ±(0.1% of rdg + 2.7°C)
WRe3-25 0.0 to 2400.0°C
±(0.05% of rdg + 2°C)
Except 0 to 200°C: ±2.5°C
2000°C or higher:
±(0.05% of rdg + 4°C)
±(0.1% of rdg + 7°C)
Except 0 to 200°C: ±12°C
2000°C or higher:
±(0.1% of rdg + 11°C)
W/WRe26 0.0 to 2400.0°C
±(0.05% of rdg + 2°C)
Except 100 to 300°C: ±4°C
less than 100°C: not guaranteed
±(0.1% of rdg + 8.5°C)
Except 100 to 300°C: ±12°C
less than 100°C: not guaranteed
N (AWG14) 0.0 to 1300.0°C ±(0.05% of rdg + 0.7°C) ±(0.1% of rdg + 3.5°C)
XK GOST –200.0 to 600.0°C
±(0.05% of rdg + 0.5°C)
Except –200 to 0°C:
±(0.2% of rdg + 0.7°C)
±(0.1% of rdg + 2.5°C)
Except –200 to 0°C:
±(1% of rdg + 2.5°C)
RTD
(Measurement
current: 1 mA)
Cu10 at 20°C
alpha = 0.00392
–200.0 to 300.0°C
±(0.1% of rdg + 2°C) ±(0.2% of rdg + 5°C)
0.1°C
Cu10 at 20°C
alpha = 0.00393
–200.0 to 300.0°C
Cu25 at 0°C
alpha = 0.00425
–200.0 to 300.0°C ±(0.1% of rdg + 0.5°C) ±(0.2% of rdg + 2°C)
Cu53 at 0°C
alpha = 0.00426035 –50.0 to 150.0°C
±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C)
Cu100 at 0°C
alpha = 0.00425
–50.0 to 150.0°C
Pt25 (JPt100 × 1/4) –200.0 to 550.0°C ±(0.1% of rdg + 0.5°C) ±(0.2% of rdg + 2°C)
Cu10 GE (high res.) –200.0 to 300.0°C
±(0.1% of rdg + 2°C) ±(0.2% of rdg + 5°C)
Cu10 L&N (high res.) –200.0 to 300.0°C
Cu10 WEED
(high res.)
–200.0 to 300.0°C
Cu10 BAILEY
(high res.)
–200.0 to 300.0°C
Pt100 GOST –200.0 to 600.0°C
±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C) Cu100 GOST –200.0 to 200.0°C
Cu50 GOST –200.0 to 200.0°C
Cu10 GOST –200.0 to 200.0°C ±(0.1% of rdg + 2°C) ±(0.2% of rdg + 5°C)
Measurement interval, integration time, and filter:
Measurement
Interval
Integration
Time
Burnout
Detection Cycle
Filter Rejected Noise and Notes
100 ms
1.67 ms
1 s *1
Rectangular
600 Hz and its integer multiples *2
200 ms
Measurement
interval
500 ms
16.67 ms 60 Hz and its integer multiples
20 ms 50 Hz and its integer multiples
Auto
Automatically detects the power supply
frequency and set 16.67 or 20 ms
1 s 36.67 ms Trapezoidal 50 Hz or 60 Hz and their integer multiples
2 s 100 ms Rectangular 10 Hz and its integer multiples
5, 10, 20, 30, 60 s 200 ms Cos Fc = 5-Hz low-pass filter
*1 When the measurement interval is 100 ms, burnout is detected in one channel per measurement interval.
Therefore, if measurement is started in a burnout condition or after a burnout occurs, burnout cannot be
detected for up to 10 measurements (approximately 1 second).
*2 Since the power supply frequency noise is not rejected, the measured vales may fluctuate especially with
temperature measurement. In such cases, set the measurement interval to 500 ms or higher, or use the
4-CH, High-Speed Universal Input Module.
Reference junction compensation:
Switch between external and internal on each channel, remote
RJC function available
Reference junction compensation accuracy:
When measuring temperature greater than or equal to 0°C and
when the temperature of the input terminal is balanced
Type R, S, W: ±1°C
Type K, J, E, T, N, L, U, XK GOST: ±0.5°C
Type N(AWG14), PLATINEL, NiNiMo, WRe3-25, W/WRe26: ±1°C
Note: The internal reference junction compensation is fixed to 0°C
for type B and PR40-20
4.5 10-CH, Medium-Speed Universal Input Module (MX110-UNV-M10) Specifications