Yokogawa PC-Based MX100 - Manual (Page 14)

1-5
IM MX100-01E
Explanation of Functions
3
2
1
4
5
Index
10-CH, Medium-Speed Digital Output Module (MX125-MKC-M10)
• Output update interval: 100 ms (shortest)
• Maximum number of outputs: 10 outputs
• Output type: A contact (SPST)
CAUTION
The 10-CH, Pulse Input Module (MX114-PLS-M10) cannot be used on the MX100
for the reasons below. Please use the 10-CH, Pulse Input Module with the MW100.
• Values measured on the MX100 are acquired by the MX100 Standard Software
or MXLOGGER (sold separately).
Pulse measurement values are transferred to the PC software every
measurement interval per the MX100 clock. For pulse integral values, pulse
measurement values sent from the MX100 per the PC clock are integrated on
the PC.
The error on the MX100 and PC clocks is different. Therefore discrepancies
arise in the number of measurements and time, and the simultaneity of other
measured values and pulse measured values is lost, along with the accuracy of
pulse integral values.
Base Plate (MX150)
The base plate is equipped with connectors for connecting the main module and input/
output modules.
Six different base plates are available to hold one to six input/output modules. You can
rack-mount or panel-mount the MX100 by attaching a DIN rail mount bracket to this base
plate.
DIN rail
Base plate
DIN rail mount bracket
1.1 Overview of the MX100