Yokogawa PC-Based MX100 - Manual (Page 11)

1-2 IM MX100-01E
Main Module (MX100-E)
The main module is equipped with a power supply connector, a power switch, an
Ethernet port, a CF card slot, and other parts. It controls the power supply to and the
control of each input/output module, communications with a PC, data storage to the CF
card when communication is disconnected, and other functions.
Ethernet port
Power switch
CF card
slot
Power connector or
screw terminal
Input/Output Modules
The following twelve types of modules are available. A plate with screw terminals
and separately installed screw terminal block (both sold separately) are available as
accessories for the 10-CH, Medium-Speed Universal Input Module and the 10-CH, High-
Speed Digital Input Module.
4-CH, High-Speed Universal Input Module (MX110-UNV-H04)
• Minimum measurement interval: 10 ms
• Maximum number of inputs: 4 inputs
• Input types: DC voltage, TC, 3-wire RTD, and DI (LEVEL,
non-voltage contact)
10-CH, Medium-Speed Universal Input Module (MX110-UNV-M10)
• Minimum measurement interval: 100 ms
• Maximum number of inputs: 10 inputs
• Input types: DC voltage, TC, 3-wire RTD, and DI (LEVEL,
non-voltage contact)
1.1 Overview of the MX100