Yokogawa PC-Based MX100 - Manual (Page 108)

4-20 IM MX100-01E
4.7 6-CH, Medium-Speed Four-Wire RTD
Resistance Input Module (MX110-V4R-M06)
Specifications
Style number: S2
Type of measurement: DC voltage, 4-wire RTD, 4-wire resistance, DI (LEVEL, non-
voltage contact)
Number of inputs: 6
Input method: Floating unbalanced input, insulation between channels
A/D resolution: 16 bits (±20000/±6000/0 to 60000)
Measurement range and accuracy:
The accuracy applies to standard operating conditions:
Ambient temp: 23±2°C, ambient humidity: 55 ±10% RH, supply
voltage: 90 to 250 VAC, power frequency: 50/60 Hz ±1%, warm-
up time: at least 30 minutes, without adverse conditions such as
vibrations.
Input
Measurement
Range Type
Rated Measurement
Range
Measurement Accuracy Highest
Resolution
(1 Digit)
Integration Time: 16.67 ms
or More
Integration Time: 1.67 ms
DC voltage
20 mV –20.000 to 20.000 mV ±(0.05% of rdg + 5 digits) ±(0.1% of rdg + 25 digits) 1 µV
60 mV –60.00 to 60.00 mV
±(0.05% of rdg + 2 digits)
±(0.1% of rdg + 10 digits)
10 µV
200 mV –200.00 to 200.00 mV
2 V –2.0000 to 2.0000 V ±(0.05% of rdg + 5 digits) 100 µV
6 V –6.000 to 6.000 V
±(0.05% of rdg + 2 digits)
1 mV
20 V –20.000 to 20.000 V
100 V –100.00 to 100.00 V 10 mV
R
TD
*7
(Measurement current: 1 mA)
Pt100 *1 –200.0 to 600.0°C
±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C) 0.1°C
JPt100 *1 –200.0 to 550.0°C
Pt100 (high res.) –140.00 to 150.00°C
±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C) 0.01°C
JPt100 (high res.) –140.00 to 150.00°C
Ni100 SAMA *2 –200.0 to 250.0°C
±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C) 0.1°C Ni100 DIN *2 –60.0 to 180.0°C
Ni120 *3 –70.0 to 200.0°C
Pt50 *5 –200.0 to 550.0°C ±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C)
0.1°C
Cu10 GE *4 –200.0 to 300.0°C
±(0.1% of rdg + 2°C) ±(0.1% of rdg + 1.5°C)
Cu10 L&N *4 –200.0 to 300.0°C
Cu10 WEED *4 –200.0 to 300.0°C
Cu10 BAILEY *4 –200.0 to 300.0°C
J263B 0.0 to 300.0K ±(0.05% of rdg + 0.3K) ±(0.1% of rdg + 1.5K) 0.1K
DI
Level Vth = 2.4 V Threshold level accuracy: ±0.1 V
Contact input ON for 1 kΩ or less, OFF for 100 kΩ or more *5
RTD *7
(Measurement
current: 0.25 mA)
Pt500 *6 –200.0 to 600.0°C
±(0.05% of rdg + 0.3°C) ±(0.1% of rdg + 1.5°C) 0.1°C
JPt1000 *6 –200.0 to 600.0°C
Resistance *7
20 Ω
(Measurement
current 1 mA)
0.000 to 20.000 Ω ±(0.05% of rdg + 7 digits) ±(0.1% of rdg + 25 digits) 0.001 Ω
200 Ω
(Measurement
current 1 mA)
0.00 to 200.00 Ω ±(0.05% of rdg + 3 digits) ±(0.1% of rdg + 15 digits) 0.01 Ω
2 kΩ
(Measurement
current 0.25 mA)
0.0 to 2000.0 Ω ±(0.05% of rdg + 3 digits) ±(0.1% of rdg + 10 digits) 0.1 Ω
*1 Pt50: JIS C 1604-1989, JIS C 1606-1989/Pt100: JIS C 1604-1997, IEC 751, DIN IEC 751/JPt100: JIS C 1604-1989, JIS C 1606-1989
*2 SAMA/DIN
*3 McGRAW EDISON COMPANY
*4 Guaranteed accuracy range Cu10 GE: –84.4 to 170.0°C/Cu10 L&N: –75.0 to 150.0°C/Cu10 WEED: –20.0 to 250.0°C/
Cu10 BAILEY: –20.0 to 250.0°C
*5 Measured using a measurement current of approximately 10 µA at 200-V range. Threshold level is approximately 0.1 V.
*6 The Pt500 resistance table is Pt100 × 5, and the resistance table for Pt1000 is Pt100 × 10.
*7 4-wire RTD, 4-wire resistance