Yokogawa PC-Based MX100 - Manual (Page 86)

3-14 IM MX100-01E
con Output connection information
Function Outputs a list of connection information of the devices connected to the
MX100.
Setting con
Example con
EA
03/01/01 00:02:45.490
Active Connections
Proto Local Address Foreign Address State
TCP 10. 0. 233. 25:34316 10. 0.232.124:1382 ESTBLISHED
TCP 10. 0. 233. 25:34317 10. 0.232.124:1380 ESTBLISHED
TCP 0. 0. 0. 0:34316 0. 0. 0. 0: 0 LISTEN
TCP 0. 0. 0. 0:34317 0. 0. 0. 0: 0 LISTEN
EN
Description Outputs a list of connections in a form enclosed by EA and EN.
Proto: Protocol used
Local Address: MX100 address and port number
Foreign Address: PC address and port number
State:
Connection status (ESTBLISHED, LISTEN,
CLOSE_WAIT...)
The max. number of connections that is output as connection information
is 24.
eth Output Ethernet statistical information
Function Outputs statistical information of the packets that flowed through the
MX100 interface (lo0: loopback device, lan0: network device). The output
value is a summed value after the MX100 is powered up.
Setting eth
Example eth
EA
03/01/01 00:02:45.490
Ethernet Statistics
Name In Pkt In Err Out Pkt Out Err 16 Coll
lo0 0 0 0 0 0
lan0 1492 176 93 0 0
EN
Description Outputs statistical information of the packets that flowed through the
interface in a form enclosed by EA and EN.
Name:
Interface name (lo: loopback, lan0: Ethernet)
In Pkt: Number of received packets
In Err: Number of packets that generated receive errors
Out Pkt: Number of transmitted packets
Out Err: Number of packets that generated transmit errors
16 Coll: Number of 16 collision occurrences
3.5 MX100 Maintenance and Test Using Communication Commands