Yokogawa PC-Based MX100 - Manual (Page 10)

1-1
IM MX100-01E
Explanation of Functions
3
2
1
4
5
Index
1.1 Overview of the MX100
The MX100 consists of the main module equipped with an Ethernet port, input/output
modules that perform input or output of signals, and the base plate that attaches and
connects all of these. By connecting the main module and a PC via the Ethernet interface
and installing one of the dedicated software programs indicated below onto the PC,
you can configure the acquisition conditions for the measured data from the PC as well
as monitor and acquire the measured data on the PC. One to twenty MX100s can be
connected to a single PC (one unit using the MX100 Standard Software, or one to twenty
units (or up to 1200 input channels) using MXLOGGER).
MX100
MX100
MX100
MX100
One-to-one connection
One-to-N connection
• MX100 Standard
Software
• MXLOGGER
(sold separately)
• Software created using
the API for the
MX100/DARWIN
(sold separately)
Connect up
to 20 units
Hub
Hub
MX100
Input/Output module Main module
Base plate
Ethernet port
PC
MX100
• MXLOGGER (sold separately)
• Software created using the API for the MX100/DARWIN (sold separately)
PC
Chapter 1 Explanation of Functions