Yokogawa Button Operated MV2000 - Manual (Page 5)

v
IM MV1000-01E
How to Use Ths Manual
Content Summary
This user’s manual consists of the chapters listed below. For information about the
communication features and the accompanying software DAQSTANDARD, read the
respective manual.
Chapter Ttle and Contents
1 Feature Overvew
The MV features.
2 Installaton and Wrng
How to install the MV, how to wire input terminals, and how to connect the power
cable.
3 Measurement Channels and Alarms
How to set measurement conditions and how to set alarms.
4 Measurement and Recordng
How to record and store measured values and other values. This chapter also
explains how to load measured data or setup data from a CF card or USB flash
memory.
5 Screen Operatons
How to use the operation screen.
6 Dsplay Confguraton
How to change the displayed information on the operation screen and how to write
a message.
7 Event Acton
How to make the MV perform a specific action in response to an event, a remote
control signal input, or a pressing of the USER key.
8 Securty Features
How to use the key lock feature and the feature that allows only registered users to
operate the MV.
9 Envronment Settngs
How to configure the time settings and how to operate the MV by using a keyboard.
10 Computaton and Report Functons (/M1 and /PM1 optons)
How to use computation channels and how to create various reports, such as
hourly, daily, weekly, and monthly reports.
11 External Input Channels (/MC1 opton)
How to use external input channels.
12 Troubleshootng and Mantenance
Explains error messages and troubleshooting measures.
13 Specfcatons
Lists the MV specifications.
Appendx Describes measured data file sizes, text file formats, etc.
Index
Note
• This user’s manual covers information about MVs that have a suffix code for language “-2”
(English).
• For language configuration instructions, see section 9.4, “Changing the Language.”