Yokogawa Button Operated MV2000 - Manual (Page 31)

1-22
IM MV1000-01E
Report Data (/M1 and /PM1 optons)
You can display report data stored in the internal memory.
For operating instructions, see section 5.5.
Displayed report data number/number of report data entries in internal memory
Start: Start date and time
Timeout: Report date and time
Channel number
Unit
Report data status
Indicates whether any of the following
occurred during the report interval.
E: Error data
O: Overflow data
P: Power failure
C: Time adjustment
B: Burnout
Average, maximum, minimum, sum, or instantaneous value
Report type
Stacked Bar Graph (/M1 and /PM1 optons)
You can display the report data of each report group in a stacked bar graph.
For operating instructions, see section 5.6.
For information on report groups, see section 10.5.
• Dsplayed Data Type
The type of data that is displayed is determined by the report type (Report kind), which
is set using the report function.
Report knd Dsplayed Data
Hourly, or hourly + daily Sums for each hour and sums for the day
Daily + weekly Sums for each day and sums for the week
Daily, or daily + monthly Sums for each day and sums for the month
Daily sum of all channels and the daily
sums of all report groups
If you select a bar graph, the sum of the hour
selected with the cursor will be displayed.
Hourly transition of report group sums (bar graph).
Daily sums (bar graph)
Example: Hourly + daily display
• Dsplay Modes
You can switch the bar graph between single graph and dual graph display.
Single graph display Dual graph display
1.4 Dsplay