Yokogawa Button Operated MV2000 - Manual (Page 176)

6-22
IM MV1000-01E
6.10 Changng the Dsplay Layout, Clearng of the
Waveform at Start, Message Dsplay Drecton,
Waveform Lne Wdth, and Grd
This section explains how to change the display layout, waveform line width, and grid. It
also explains how to clear waveforms when memory sampling starts.
For an explanation of these functions, see section 1.4.
Dsplay
MV1000
Press MENU and then select Menu tab > Dsplay > Trend.
MV2000
Press MENU and then select Menu tab > Dsplay > Trend, Bar graph, LCD, Montor.
Settngs
• Trend > Drecton
Set the trend waveform display direction to Horizontal, Vertical, Wide, or Split.
• Trend > Trend clear
Settng Descrpton
On Clears the displayed waveforms when memory sampling starts.
Off Does not clear the displayed waveforms when memory sampling starts.
• Trend > Message drecton
Sets the message display direction to Horizontal or Vertical. The message direction is
fixed to Horizontal if Trend Direction is set to Vertical.
• Trend > Trend lne
Sets the line width of trends in dots (1 to 3).