Yokogawa Button Operated MV2000 - Manual (Page 239)

10-19
IM MV1000-01E
Computat
on and Report Funct
ons (/M1 and /PM1 opt
ons)
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• Report set > Date/Day of the week, Tme (hour)
Set the date or day of the week and the time when the report will be generated. The
specified date/time is when the report file is divided. Set the values in the range
indicated below. Items with a dash are invalid.
Report Type Date Day of Week Tme
Hour - - 0 to 23
Day 1 to 28* - 0 to 23
H+D - - 0 to 23
Day+Week - SUN to SAT 0 to 23
D+M 1 to 28* - 0 to 23
* You cannot specify 29, 30, or 31.
Report Flng Tme and Date/Tme When a Report Fle Is Dvded
Example: When the Date of a daily report is set to 1 and the Time (hour) is set to
18:00
A daily report is created every day at hour 18.
The file that the report is stored to is divided at 18:00 on day 1 of each month.
• Report channel number
Determines the order in which reports are output.
• Report CH > On/Off
Select On to use the report channels.
• Report CH > Channel
Set the channel to be assigned to the report channel. All channels can be assigned,
but reports are not generated for channels set to Skip or Off even if they are assigned.
In a stacked bar graph display (see section 5.6 for details), the MV shows report data
for each group indicated below. However, the MV displays only channels with the
same unit as the first channel in the group.
Report Group MV1004, MV1008,
MV2008
MV1006, MV1012,
MV1024
MV2010, MV2020,
MV2030, MV2040,
MV2048
1 R001 to R006 R001 to R006 R001 to R010
2 R007 to R012 R007 to R012 R011 to R020
3 - R013 to R018 R021 to R030
4 - R019 to R024 R031 to R040
5 - - R041 to R050
6 - - R051 to R060
• Report CH > Sum scale
Select the sum scale from /s to /day to match the time unit of the measured value.
Example: If the unit of the measured value is m 3 /min, select /mn.
Off: Directly sums the measured data for each scan interval.
Procedure
• Start/Stop Report Generaton
Report generation starts when memory sampling starts. Report generation stops when
memory sampling stops.
• Dsplayng Reports
See sections 5.5 and 5.6 for details.
• Savng Reports
See section 1.5 for details.
10.5 Generatng Reports