Yokogawa Button Operated MV2000 - Manual (Page 119)

4-19
IM MV1000-01E
Measurement and Record
ng
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
4.9 Savng and Loadng Setup Data
This section explains how to save and load setup data from external storage media.
Procedure
• Savng Setup Data
1. To access the display:
Press MENU and then select Fle tab > Save settngs. Press the CF or USB soft
key * and then DISP/ENTER.
* When using a CF card and USB flash memory.
2. Enter the file name (up to 32 characters, A a # 1 ).
You can use these symbols: # % ( ) + – . @ ° _
You cannot use these character combinations: “AUX” “CON” “PRN” “NUL”
“CLOCK” “COM1” to “COM9” and “LPT1” to “LPT9”.
To cancel the operation, press
ESC.
3. Press DISP/ENTER.
The setup data is saved.
• Loadng Setup Data
The MV loads all Setting Mode and Basic Setting Mode settings. When setup data is
loaded, the previous settings are erased and the MV restarts with the loaded settings.
1. To access the display:
* Press MENU and then select Fle tab > Load settngs. Press the CF or USB soft
key * and then DISP/ENTER.
* When using a CF card and USB flash memory.
Note
For details on using the Sort soft key, see section 4.7.