Yokogawa Button Operated MV2000 - Manual (Page 102)

4-2
IM MV1000-01E
• Event Data Recordng Condtons
Press MENU and then select > Menu tab > Data save > Event data.
Settngs
• Memory > Data Knd
Settng Descrpton
Display Records display data.
E+D Records display data and event data. You cannot select this setting if the
trend interval switching function (Trend rate switching) is set to on On (see
section 6.3 for details)
Event Records event data.
• Memory sample > On/Off
Select On for the target channels.
• Dsp data > Trend/Storage nterval
Set the display trend/storage interval. For the trend/storage intervals that can only be
set on high-speed input models, 5 s/div and 10 s/div, 1 division (div) is equal to 40
dots.
You can only set trend/storage intervals that are longer than the scan interval you set
in Basic Setting Mode.
• Dsp data > Save nterval (when recordng dsplay data)
Set the size of recorded data files. Recorded data is divided into files of the size
specified here. The values that you can set here vary depending on the Trend/Storage
interval setting.
Trend/Storage
nterval
1
5s 2 10s 2 15s 3 30s 1mn
Samplng nterval 125ms 250ms 500ms 1s 2s
Selectable Save
Interval Values 10 min to 12 h 10 min to 1
day 10 min to 3
days 10 min to 7
days 10 min to 14
days
Trend/Storage
nterval
1
2mn 5mn 10mn 15mn 20mn
Samplng nterval 4s 10s 20s 30s 40s
Selectable Save
Interval Values 10 min to 14
days 10 min to 31
days 10 min to 31
days 10 min to 31
days 1 h to 31 days
Trend/Storage
nterval
1
30mn 1h 2h 4h 10h
Samplng nterval 1 min 2 min 4 min 8 min 20 min
Selectable Save
Interval Values 1 h to 31 days 1 h to 31 days 2 h to 31 days 4 h to 31 days 8 h to 31 days
1 You can only set a data interval that corresponds to a sampling interval that is slower than
the scan interval.
2 Only available on high-speed input models of the MV.
3 Selectable in fast sampling mode on medium-speed input models of the MV.
4.1 Settng the Recordng Condtons of Measured Data