Yokogawa Button Operated MV2000 - Manual (Page 184)

6-30
IM MV1000-01E
6.14 Automatcally Returnng to a Specfed Dsplay
This section explains how to configure the MV to automatically switch back to a specified
display if there is no user activity within a set time period.
Dsplay
MV1000
Press MENU and then select Menu tab > Dsplay > Montor.
MV2000
Press MENU and then select Menu tab > Dsplay > Trend, Bar graph, LCD, Montor.
Settngs
• Montor > Jump default dsplay
The MV will return to a specified display if there is no key operation within a set time
period.
Settng Descrpton
1min to 1h The time interval for switching the display.
Off Disables this function.
Procedure
• Specfyng the Dsplay
1. Switch to the operation screen that you want to register.
2. In Operation Mode, press FUNC.
The function menu appears.
3. Press the Standard dsplay soft key.
The display is registered.